
1. Tone block with an Indian ink wash or a wash of a black film
2. Transfer paper with the help of iron ioxide
3. Use wood cutting tools to cut image onto block
4. Roll ink over the block
5. Put on press and inl transfer to paper

1. Polish and clean plate
2. Etch the plate
3. Rinse plate for 15 minutes
4. Wipe and remove excess ink
5. Cover with damp paper
6. Run through press at high temperature

Lithography printing is the process of using oil and water.
1. Apply small amount of rosin om image for sketching
2. Apply gum arabic to the stone for the non-image area
3. Apply acidified gum arabic
4. Use cheesecloth to buff in easily
5. Wash drawing with lithotine and replace with asphalltum
6. Sponge surface and apply ink
7. Print on damp paper
Comments
Post a Comment